product description
|
WS2811 RGB 5050 digital led strip lights 42led/m 5V 10mm width |
|
|
Model: |
YT-5050-42-RGB-10MM-WS2811-DG-A1 |
|
IC Model: |
WS2811 |
|
Pixel: |
42 |
|
Gray Scale: |
256 |
|
IC QTY: |
42pcs ic per meter,210pcs ic per roll |
|
LED QTY: |
42pcs led per meter,210pcs led per roll |
|
Max Watts: |
12.6W per meter,63W per roll |
|
Dimensions: |
L5000xW10xH2.5mm |
|
Color of light: |
RGB |
|
Input voltage: |
DC5V |
|
Color of PCB Board: |
White/Black |
Detailed description of WS2811 RGB 5050 digital led strip lights 42led/m 5V 10mm width :
1) Control IC WS2811 On PCB Board 5050 RGB LED diode, supporting numerous color-change effects
2) With 3M adhersive tape back,easy for installation
3)
Can be Non-waterproof or Waterproof-surface injection sillicon
Gel(IP65) or Waterproof-sillicon tube(IP67) or Waterproof-Whole
injection(IP68)
*Non-waterproof : Bare Strip,with self-adhesive backing, for indoor or dry location use
*Waterproof IP65 :
Strip Surface is covered on top with Gel, and with self-adhesive
backing.IP65 grade can protect sprayed water from all direction
*Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. IP67 grade can shortly immersed in water
*Waterproof IP68:
The bare strip is put in a U Shape silicone tube, then covered on top
with silicon gel, and sealed at two ends,which make it’s solid.IP68
grade can be used under water
4) Input voltage: DC5V
5) Flexible PCB material . Each LED/Pixel can be cut
6) 42LEDs/M . 5V low voltage inputted , don¡¯t over 6V , otherwise you will destroy the entire strip
7) It comes in 5 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
8) Controller System: SD controller , DMX controller , Artnet and so on
9) High quality,High bright;Warranty: 2 years
