WS2813 RGB 5050 digital led strip lights 30led/m 5V 10mm width
Model：
YT-5050-30-RGB-10MM-WS2813-DG-A1
IC Model：
WS2813
Pixel：
30
Gray Scale：
256
IC QTY：
30pcs ic per meter,150pcs ic per roll
LED QTY：
30pcs led per meter,150pcs led per roll
Max Watts：
9W per meter,45W per roll
Dimensions：
L5000xW10xH2.5mm
Color of light：
RGB
Input voltage：
DC5V
Color of PCB Board：
White/Black
Detailed description of WS2813 RGB 5050 digital led strip lights 30led/m 5V 10mm width :
1) Control IC WS2813 inserted in 5050 RGB LED diode, supporting numerous color-change effects
2) With 3M adhersive tape back,easy for installation
3)
Can be Non-waterproof or Waterproof-surface injection sillicon
Gel(IP65) or Waterproof-sillicon tube(IP67) or Waterproof-Whole
injection(IP68)
*Non-waterproof : Bare Strip,with self-adhesive backing, for indoor or dry location use
*Waterproof IP65 :
Strip Surface is covered on top with Gel, and with self-adhesive
backing.IP65 grade can protect sprayed water from all direction
*Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. IP67 grade can shortly immersed in water
*Waterproof IP68:
The bare strip is put in a U Shape silicone tube, then covered on top
with silicon gel, and sealed at two ends,which make it's solid.IP68
grade can be used under water
4) Input voltage: DC5V
5) Flexible PCB material . Each LED/Pixel can be cut
6) 30LEDs/M . 5V low voltage inputted , don’t over 6V , otherwise you will destroy the entire strip
7) It comes in 5 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
8) Controller System:SD controller , DMX controller , Artnet and so on
updating...
WS2813 RGB 5050 digital led strip lights 30led/m 5V 10mm width
Model：
IC Model：
Pixel：
Gray Scale：
IC QTY：
LED QTY：
Max Watts：
Dimensions：
Color of light：
Input voltage：
Color of PCB Board：
Detailed description of WS2813 RGB 5050 digital led strip lights 30led/m 5V 10mm width :
1) Control IC WS2813 inserted in 5050 RGB LED diode, supporting numerous color-change effects
2) With 3M adhersive tape back,easy for installation
3) Can be Non-waterproof or Waterproof-surface injection sillicon Gel(IP65) or Waterproof-sillicon tube(IP67) or Waterproof-Whole injection(IP68)
*Non-waterproof : Bare Strip,with self-adhesive backing, for indoor or dry location use
*Waterproof IP65 : Strip Surface is covered on top with Gel, and with self-adhesive backing.IP65 grade can protect sprayed water from all direction
*Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. IP67 grade can shortly immersed in water
*Waterproof IP68: The bare strip is put in a U Shape silicone tube, then covered on top with silicon gel, and sealed at two ends,which make it's solid.IP68 grade can be used under water
4) Input voltage: DC5V
5) Flexible PCB material . Each LED/Pixel can be cut
6) 30LEDs/M . 5V low voltage inputted , don’t over 6V , otherwise you will destroy the entire strip
7) It comes in 5 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
8) Controller System:SD controller , DMX controller , Artnet and so on
9) High quality,High bright;Warranty: 2 years