cob led strip 720led/m 24V 12mm width 23W/m

Model:

CRI(Ra):

Ra>90

LEDs:

720pcs led per meter

Input voltage:

DC24V

Cuttable Length:

50mm

Output Lumen:

80-90LM/W

Color of light:

Warm white,natural white,Cool white

Color of PCB Board:

White

Color Temperature:

2700K,3000K,4000K,6000K

Dimensions:

L5000xW12mm

LED Quantity:

With 720pcs  LEDs per meter, 3600pcs for 5 meters

Watts:

23W per meter, 115W per roll

Detailed description of cob led strip 720led/m 24V 12mm width 23W/m:

1) Warm white/natural white/Cool white available

2) Without any light spot.The light is very uniform

3) With 3M adhersive tape back,easy for installation

4) Input voltage: DC24V

5) No RF interference

6) Long life: more than 50, 000+ hours

7) Low power consumption,super Bright

8) Warranty: 3 years

The post cob led strip 720led/m 24V 12mm width 23W/m first appeared on LED Strip Manufacturer | Strip Tape | Neon Lights.

cob led strip 720led/m 24V 12mm width 46W/m

Model:

CRI(Ra):

/

LEDs:

720pcs led per meter

Input voltage:

DC24V

Cuttable Length:

25mm

Color of light:

RGB

Color of PCB Board:

White

Color Temperature:

/

Dimensions:

L5000xW12mm

LED Quantity:

With 720 pcs  LEDs per meter,3600 pcs for 5 meters

Watts:

46W per meter,230W per roll

Detailed description of cob led strip 720led/m 24V 12mm width 46W/m:

1) RGB Color 

2) Without any light spot.The light is very uniform

3) With 3M adhersive tape back,easy for installation

4) Input voltage: DC24V

5) No RF interference

6) Long life: more than 50, 000+ hours

7) Low power consumption,super Bright

8) Warranty: 3 years

The post cob led strip 720led/m 24V 12mm width 46W/m first appeared on LED Strip Manufacturer | Strip Tape | Neon Lights.

WS2811 RGB 020 digital led strip lights 60led/m 12V 10mm width

Model:

IC Model:

Pixel:

Gray Scale:

IC QTY:

LED QTY:

Max Watts:

Dimensions:

Color of light:

Input voltage:

Color of PCB Board:

Detailed description of WS2811 RGB 020 digital led strip lights 60led/m 12V 10mm width :

1) Control IC WS2811 On PCB Board 020 RGB LED diode, supporting numerous color-change effects

2) With 3M adhersive tape back,easy for installation

3)
Can be Non-waterproof or Waterproof-surface injection sillicon
Gel(IP65) or Waterproof-sillicon tube(IP67) or Waterproof-Whole
injection(IP68)

*Non-waterproof : Bare Strip,with self-adhesive backing, for indoor or dry location use

*Waterproof IP65 :
Strip Surface is covered on top with Gel, and with self-adhesive
backing.IP65 grade can protect sprayed water from all direction

*Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. IP67 grade can shortly immersed in water

*Waterproof IP68:
The bare strip is put in a U Shape silicone tube, then covered on top
with silicon gel, and sealed at two ends,which make it’s solid.IP68
grade can be used under water

4) Input voltage: DC12V

5) Flexible PCB material . Each 3 LED/1 Pixel can be cut

6) 60LEDs/M . 12V low voltage inputted , don¡¯t over 13V , otherwise you will destroy the entire strip

7) It comes in 5 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

8) Controller System: SD controller , DMX controller , Artnet and so on

9) High quality,High bright;Warranty: 2 years

The post WS2811 RGB 020 digital led strip lights 60led/m 12V 10mm width first appeared on LED Strip Manufacturer | Strip Tape | Neon Lights.

WS2811 RGB 5050 digital led strip lights 30led/m 12V 10mm width

Model:

IC Model:

Pixel:

Gray Scale:

IC QTY:

LED QTY:

Max Watts:

Dimensions:

Color of light:

Input voltage:

Color of PCB Board:

Detailed description of WS2811 RGB 5050 digital led strip lights 30led/m 12V 10mm width :

1) Control IC WS2811 On PCB Board 5050 RGB LED diode, supporting numerous color-change effects

2) With 3M adhersive tape back,easy for installation

3)
Can be Non-waterproof or Waterproof-surface injection sillicon
Gel(IP65) or Waterproof-sillicon tube(IP67) or Waterproof-Whole
injection(IP68)

*Non-waterproof : Bare Strip,with self-adhesive backing, for indoor or dry location use

*Waterproof IP65 :
Strip Surface is covered on top with Gel, and with self-adhesive
backing.IP65 grade can protect sprayed water from all direction

*Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. IP67 grade can shortly immersed in water

*Waterproof IP68:
The bare strip is put in a U Shape silicone tube, then covered on top
with silicon gel, and sealed at two ends,which make it’s solid.IP68
grade can be used under water

4) Input voltage: DC12V

5) Flexible PCB material . Each 3 LED/1 Pixel can be cut

6) 30LEDs/M . 12V low voltage inputted , don¡¯t over 13V , otherwise you will destroy the entire strip

7) It comes in 5 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

8) Controller System: SD controller , DMX controller , Artnet and so on

9) High quality,High bright;Warranty: 2 years

The post WS2811 RGB 5050 digital led strip lights 30led/m 12V 10mm width first appeared on LED Strip Manufacturer | Strip Tape | Neon Lights.

WS2811 RGB 5050 digital led strip lights 48led/m 12V 10mm width

Model:

IC Model:

Pixel:

Gray Scale:

IC QTY:

LED QTY:

Max Watts:

Dimensions:

Color of light:

Input voltage:

Color of PCB Board:

Detailed description of WS2811 RGB 5050 digital led strip lights 48led/m 12V 10mm width :

1) Control IC WS2811 On PCB Board 5050 RGB LED diode, supporting numerous color-change effects

2) With 3M adhersive tape back,easy for installation

3)
Can be Non-waterproof or Waterproof-surface injection sillicon
Gel(IP65) or Waterproof-sillicon tube(IP67) or Waterproof-Whole
injection(IP68)

*Non-waterproof : Bare Strip,with self-adhesive backing, for indoor or dry location use

*Waterproof IP65 :
Strip Surface is covered on top with Gel, and with self-adhesive
backing.IP65 grade can protect sprayed water from all direction

*Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. IP67 grade can shortly immersed in water

*Waterproof IP68:
The bare strip is put in a U Shape silicone tube, then covered on top
with silicon gel, and sealed at two ends,which make it’s solid.IP68
grade can be used under water

4) Input voltage: DC12V

5) Flexible PCB material . Each 3 LED/1 Pixel can be cut

6) 48LEDs/M . 12V low voltage inputted , don¡¯t over 13V , otherwise you will destroy the entire strip

7) It comes in 5 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

8) Controller System: SD controller , DMX controller , Artnet and so on

9) High quality,High bright;Warranty: 2 years

The post WS2811 RGB 5050 digital led strip lights 48led/m 12V 10mm width first appeared on LED Strip Manufacturer | Strip Tape | Neon Lights.

WS2811 RGB 5050 digital led strip lights 60led/m 5V 10mm width

Model:

IC Model:

Pixel:

Gray Scale:

IC QTY:

LED QTY:

Max Watts:

Dimensions:

Color of light:

Input voltage:

Color of PCB Board:

Detailed description of WS2811 RGB 5050 digital led strip lights 60led/m 5V 10mm width :

1) Control IC WS2811 inserted in 5050 RGB LED diode, supporting numerous color-change effects

2) With 3M adhersive tape back,easy for installation

3)
Can be Non-waterproof or Waterproof-surface injection sillicon
Gel(IP65) or Waterproof-sillicon tube(IP67) or Waterproof-Whole
injection(IP68)

*Non-waterproof : Bare Strip,with self-adhesive backing, for indoor or dry location use

*Waterproof IP65 :
Strip Surface is covered on top with Gel, and with self-adhesive
backing.IP65 grade can protect sprayed water from all direction

*Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. IP67 grade can shortly immersed in water

*Waterproof IP68:
The bare strip is put in a U Shape silicone tube, then covered on top
with silicon gel, and sealed at two ends,which make it’s solid.IP68
grade can be used under water

4) Input voltage: DC5V

5) Flexible PCB material . Each LED/Pixel can be cut

6) 60LEDs/M . 5V low voltage inputted , don¡¯t over 6V , otherwise you will destroy the entire strip

7) It comes in 5 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

8) Controller System: SD controller , DMX controller , Artnet and so on

9) High quality,High bright;Warranty: 2 years

The post WS2811 RGB 5050 digital led strip lights 60led/m 5V 10mm width first appeared on LED Strip Manufacturer | Strip Tape | Neon Lights.

WS2811 White 5050 digital led strip lights 60led/m 12V 10mm width

Model:

IC Model:

Pixel:

Gray Scale:

IC QTY:

LED QTY:

Max Watts:

Dimensions:

Color of light:

Input voltage:

Color of PCB Board:

Detailed description of WS2811 White 5050 digital led strip lights 60led/m 12V 10mm width :

1) Control IC WS2811 On PCB Board 5050 LED diode, supporting numerous color-change effects

2) With 3M adhersive tape back,easy for installation

3)
Can be Non-waterproof or Waterproof-surface injection sillicon
Gel(IP65) or Waterproof-sillicon tube(IP67) or Waterproof-Whole
injection(IP68)

*Non-waterproof : Bare Strip,with self-adhesive backing, for indoor or dry location use

*Waterproof IP65 :
Strip Surface is covered on top with Gel, and with self-adhesive
backing.IP65 grade can protect sprayed water from all direction

*Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. IP67 grade can shortly immersed in water

*Waterproof IP68:
The bare strip is put in a U Shape silicone tube, then covered on top
with silicon gel, and sealed at two ends,which make it’s solid.IP68
grade can be used under water

4) Input voltage: DC12V

5) Flexible PCB material . Each 3 LED/1 Pixel can be cut

6) 60LEDs/M . 12V low voltage inputted , don¡¯t over 13V , otherwise you will destroy the entire strip

7) It comes in 5 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

8) Controller System: SD controller , DMX controller , Artnet and so on

9) High quality,High bright;Warranty: 2 years

The post WS2811 White 5050 digital led strip lights 60led/m 12V 10mm width first appeared on LED Strip Manufacturer | Strip Tape | Neon Lights.

SK6812 RGB 5050 digital led strip lights 96led/m 5V 10mm width

Model:

IC Model:

Pixel:

Gray Scale:

IC QTY:

LED QTY:

Max Watts:

Dimensions:

Color of light:

Input voltage:

Color of PCB Board:

Detailed description of SK6812 RGB 5050 digital led strip lights 96led/m 5V 10mm width :

1) Control IC SK6812 inserted in 5050 RGB LED diode, supporting numerous color-change effects

2) With 3M adhersive tape back,easy for installation

3)
Can be Non-waterproof or Waterproof-surface injection sillicon
Gel(IP65) or Waterproof-sillicon tube(IP67) or Waterproof-Whole
injection(IP68)

*Non-waterproof : Bare Strip,with self-adhesive backing, for indoor or dry location use

*Waterproof IP65 :
Strip Surface is covered on top with Gel, and with self-adhesive
backing.IP65 grade can protect sprayed water from all direction

*Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. IP67 grade can shortly immersed in water

*Waterproof IP68:
The bare strip is put in a U Shape silicone tube, then covered on top
with silicon gel, and sealed at two ends,which make it’s solid.IP68
grade can be used under water

4) Input voltage: DC5V

5) Flexible PCB material . Each LED/Pixel can be cut

6) 144LEDs/M . 5V low voltage inputted , don¡¯t over 6V , otherwise you will destroy the entire strip

7) It comes in 5 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

8) Controller System: SD controller , DMX controller , Artnet and so on

9) High quality,High bright;Warranty: 2 years

The post SK6812 RGB 5050 digital led strip lights 96led/m 5V 10mm width first appeared on LED Strip Manufacturer | Strip Tape | Neon Lights.

SK6812 RGBW 5050 digital led strip lights 96led/m 5V 10mm width

Model:

IC Model:

Pixel:

Gray Scale:

IC QTY:

LED QTY:

Max Watts:

Dimensions:

Color of light:

Input voltage:

Color of PCB Board:

Detailed description of SK6812 RGBW 5050 digital led strip lights 96led/m 5V 10mm width :

1) Control IC SK6812 inserted in 5050 RGBW LED diode, supporting numerous color-change effects

2) With 3M adhersive tape back,easy for installation

3)
Can be Non-waterproof or Waterproof-surface injection sillicon
Gel(IP65) or Waterproof-sillicon tube(IP67) or Waterproof-Whole
injection(IP68)

*Non-waterproof : Bare Strip,with self-adhesive backing, for indoor or dry location use

*Waterproof IP65 :
Strip Surface is covered on top with Gel, and with self-adhesive
backing.IP65 grade can protect sprayed water from all direction

*Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. IP67 grade can shortly immersed in water

*Waterproof IP68:
The bare strip is put in a U Shape silicone tube, then covered on top
with silicon gel, and sealed at two ends,which make it’s solid.IP68
grade can be used under water

4) Input voltage: DC5V

5) Flexible PCB material . Each LED/Pixel can be cut

6) 144LEDs/M . 5V low voltage inputted , don¡¯t over 6V , otherwise you will destroy the entire strip

7) It comes in 5 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

8) Controller System: SD controller , DMX controller , Artnet and so on

9) High quality,High bright;Warranty: 2 years

The post SK6812 RGBW 5050 digital led strip lights 96led/m 5V 10mm width first appeared on LED Strip Manufacturer | Strip Tape | Neon Lights.

SK6812 RGBW 5050 digital led strip lights 72led/m 5V 10mm width

Model:

IC Model:

Pixel:

Gray Scale:

IC QTY:

LED QTY:

Max Watts:

Dimensions:

Color of light:

Input voltage:

Color of PCB Board:

Detailed description of SK6812 RGBW 5050 digital led strip lights 72led/m 5V 10mm width :

1) Control IC SK6812 inserted in 5050 RGBW LED diode, supporting numerous color-change effects

2) With 3M adhersive tape back,easy for installation

3)
Can be Non-waterproof or Waterproof-surface injection sillicon
Gel(IP65) or Waterproof-sillicon tube(IP67) or Waterproof-Whole
injection(IP68)

*Non-waterproof : Bare Strip,with self-adhesive backing, for indoor or dry location use

*Waterproof IP65 :
Strip Surface is covered on top with Gel, and with self-adhesive
backing.IP65 grade can protect sprayed water from all direction

*Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. IP67 grade can shortly immersed in water

*Waterproof IP68:
The bare strip is put in a U Shape silicone tube, then covered on top
with silicon gel, and sealed at two ends,which make it’s solid.IP68
grade can be used under water

4) Input voltage: DC5V

5) Flexible PCB material . Each LED/Pixel can be cut

6) 144LEDs/M . 5V low voltage inputted , don¡¯t over 6V , otherwise you will destroy the entire strip

7) It comes in 5 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

8) Controller System: SD controller , DMX controller , Artnet and so on

9) High quality,High bright;Warranty: 2 years

The post SK6812 RGBW 5050 digital led strip lights 72led/m 5V 10mm width first appeared on LED Strip Manufacturer | Strip Tape | Neon Lights.